:: E-Power ::

Charge Controller

Charge controller gets electricity from solar panels, charges into batteries, controls charge current, charge level, discharge current and discharge level as well. The charge controller is needed only when power storage in the battery is necessary.

SOLARCON SET-series

•	Solar charge controller with 10A DC load timer
•	Advanced microprocessor control with stage charging
•	Automatic ON-OFF
•	LED indication
•	Low battery shutdown with alarm
•	Lightning surge protection
•	Overcharge and overdischarge protection
•	Low loss PV back feed current protection
•	Reverse polarities protection for PV and battery
•	ON-OFF timer 7 modes
•	Input voltage: 12 V, 24 V and 48 V
•	Output current: 10 A, 20 A and 30 A
•	C-tick compliance for EMC*
•	ISO 9001 and ISO 14001 certified
	*Electromagnetic compliance

SOLARCON SCP-series

•	Advanced microprocessor control
•	Automatic ON-OFF
•	3-step charging to provide quick and safe charging for battery
•	Comprehensive LED indication and LCD digital display
•	Lightning surge protection
•	Overload alarm and protection
•	Overcharge and overdischarge protection
•	Power and event data logger and display on LCD
•	Input voltage: 24V, 48 V, 120 V and 240 V
•	Output current: 30 A, 60 A, 120 A and 240 A
•	ISO 9001:2000 and ISO 14001 certified

SOLARCON SCM-series

•	Advanced microprocessor control
•	Maximum Power Point Tracking circuit included
•	High efficiency > 98%
•	Automatic ON-OFF
•	3-step charging to provide quick and safe charging for battery
•	Comprehensive LED indication and LCD digital display
•	Lightning surge protection
•	Overload alarm and protection
•	Overcharge and over discharge protection
•	Power and event data logger and display on LCD
•	Input nominal PV voltage: 120 V, Output Battery voltage: 240 V
•	Output current: 35 A, 70 A and 100 A
•	ISO 9001 and ISO 14001 certified

SOLARCON SPM-series

•	SOLAR CHARGE CONTROLLER WITH MPPT CURRENT BOOSTER FOR DC MOTOR OR PUMP CONTROL
•	Advanced microprocessor control
•	Maximum Power Point Tracking (MPPT) circuit included
•	DC motor appliances or pump control
•	Reverse polarities protection for PV
•	Short circuit, over charge and over discharge protection
•	Remote switch for ON/OFF DC motor or pump
•	Wall mounted type
•	Protection class typical IP54
•	ISO 9001 and ISO 14001 certified

SOLARCON SPT-series

•	Solar charge controller with MPPT and 10A DC load timer
•	Advanced microprocessor control
•	Buck regulator wide input range
•	Maximum Power Point Tracking (MPPT) circuit included
•	Solar charger controller with DC load control
•	Reverse polarities protection for PV and battery
•	Battery overcharge and overdischarge protection
•	Temperature compensation (-3 to -7mV/ Cell/ Celsius)
•	Lightning surge protection (TVSS)
•	Capable to use with high Vmp PV (A-Si PV)
•	3-step charging to provide quick and safe charging for battery
•	Automatic cooling fan
•	7 modes timer control (ON/OFF DC load) selectable
•	Comply with CISPR11 Class B standard (option)
•	C-tick compliance for EMC*
•	ISO 9001 and ISO 14001 certified
	*Electromagnetic compliance

<--Back